Beginning the CB900C Carb Rebuild
It’s been a while since I’ve done some work on the bikes (winter time projects were in the way). Bringing the CB900C back to the middle of the garage, I fueled her up to see where the project was left off. Engine started after a bit but still running rough. Taking some quick temps, I noticed that the header off of cylinder 4 was much colder than the other 3, so it’s time to pull the carbs, give them a clean, and see what’s really going on.
After pulling off the carb pack, I started breaking things down to single carbs. After stripping a few of the screws on the braces I finally started getting into the single carbs but needed to break for the night. Found a great reference for breaking these carbs down here:
https://www.cb750c.com/publicdocs/SeanG/Honda_Carb_Manual_revD.pdf
Definitely will be making my way through that document in hopes of getting them back together. Will post more and pictures as the project continues.